Poppy is an open-source robotics platform based on 3D printing. The Poppy project benefits from a large community in France. The main objective is robots be powerful tools for learning and creativity.
Poppy is an open-source robotics platform based on 3D printing. The Poppy technology platform consists of open-source hardware models (CC-BY-SA), an open-source Pypot software library based on the Python language. The Poppy project benefits from a large community in France. The main objective is robots be powerful tools for learning and creativity.
[[_TOC_]]
[[_TOC_]]
# Working with poppy ergo jr
# Working with Poppy ergo jr
Ergo Jr is an low-cost robotic arm easy to assemble and modify. It is composed of 6 motors allowing almost natural movements, as well as 3D printed elements. The use of rivets makes the modifications easy to realize. 3 tools allowing different interactions with the environment accompany Ergo Jr: a lampshade, a clamp, and a pen holder. The robot is controlled by a Raspberry Pi card, and it is equipped with a camera to interact with the world.
Ergo Jr is an low-cost robotic arm easy to assemble and modify. It is composed of 6 degrees of freedom allowing almost natural movements, as well as 3D printed elements. The use of rivets makes the modifications easy to realize. 3 tools allowing different interactions with the environment accompany Ergo Jr: a lampshade, a clamp, and a pen holder. The robot is controlled by a Raspberry Pi card, and it is equipped with a camera to interact with the world.
Poppy can be manipulated either with Snap!, a variant of the visual programming language Scratch, or with ROS.
Poppy can be manipulated either with Snap!, a variant of the visual programming language Scratch, or with ROS.
## Specifications
## Specifications
## Using native arhicture
+ 6 x servomoteurs Dynamixel XL-320
+ 1 x Pack de rivets OLLO RS-101 with OLLO Tool
+ 1 x Carte Pixl
+ 1 x Carte Raspberry Pi 3 modèle B
+ 1 x Carte mémoire microSD 8 Go
+ 1 x Alimentation 7.5V pour la carte Pixl
+ 1 x Module Caméra V2 pour Raspberry Pi
+ 3 prehenseurs interchangeables : un abat-jour, une pince et un porte-crayon
